Alliston Home Inspector

Alliston Home Inspector Provides “Peace of Mind”

After performing over 8,000 home inspections one thing sticks out clearly about buying homes,  and that is no two homes are alike.  Different builders, quality of building materials, age of house and renovations can make all the difference in the quality of your home.

The-Alliston-Home-Inspector 

 

 

 

 

 

Is that house really a bargain?  Beautiful basement, but what is really behind those walls and above that ceiling?  These are some of the items that an experienced home inspector can tell you. The basement of a home tells the true story about maintenance, building permits and possible illegal wiring or plumbing.

Home Buying Tips

When buying a new home you only have to watch out for defective products and poor workmanship,  all done by tradesmen who are sub-contractors of the builder.

When buying an older home you have to worry about shoddy and unsafe workmanship, especially if any renovations have been done.

Any plumbing, electrical or structural deficiencies immediately raise a Red Flag which indicates that work has been done without obtaining the required Building Permit.   Even if the work looks well done you will be on the hook for any future issues that may arise.

Some home owners like to work with metal studs when framing a basement but they don’t want to pay for the proper electrical fittings required when you use metal studs.  This could affect the safety of you and your family if the entire metal wall structure becomes energized.

Another common electrical deficiency is electrical outlets with “Reversed Polarity”.  This can also affect the safety of your family if small or handheld electrical appliances are plugged into faulty outlet.

Do it yourself roofers are another hazard home buyers want to be aware of.  I recently inspected a waterfront property during a period of heavy rain.  The inspection lasted as long as it took to open the front door.  The water was pouring through the wood ceiling and leaking down through the floor.   The buyer locked the door and we left.  The owners home insurance would probably not cover the water damage due to a Do It Yourself roofing project.

Don't Buy a Money-Pit 

 

 

 

 

Thermal Imaging Inspections

When I walk into a home which has just been “Freshened Up” for sale, the first thing I look at is the installation of the laminate flooring.  I look at door corners and entrances to see how the laminate was installed.  Then the paint tells a story, how was it put on and does it cover the previous colour.  Kitchen counter tops are sometimes refinished with an “out of the box” product, cupboard doors are usually repainted etc.  This are typically rental properties that are put on the market and a quick sprucing up is applied to give better appeal.  Lipstick on a Pig is my view of these homes.  Everything is cosmetic with no real upgrading or professional repairs being made.

When you are buying a home between 15 and 20 years old there are some items that will soon need replacement if not done already.  Typically your furnace will be at the end of its predictable service life,  the roof will need replacing and your windows could be at an age where the thermal seals will start leaking.  Most home sellers will do the upgrades prior to selling to add value to their property, but if not you should be aware of future expenses that you may be incurring.

The Alliston Home Inspector is a Certified Building Code Official with the Ontario Building Officials Association,  a Certified Master Inspector,  was a Registered Builder with HUDAC and has over 20 years of actual home inspection experience.

View of hidden moisture detected with Thermal Imaging Camera.  Without the use of an Infrared Camera this moisture would have gone undetected.  Free Thermal Imaging with every home inspection.

Infrared technology can help find missing insulation and moisture intrusion.  Older homes tend to have many areas where insulation was not installed or has shifted over time and is now allowing cold air to enter your home.

Every Home Inspection comes with a 100% Money Back Guarantee – Good for 30 days after you move into your new home.

Call the Alliston Home Inspector at 705-795-8255 or Toll Free at 888-818-8608

Email Roger

Articles You May Enjoy

Home Inspectors Barrie Ontario
Midland Home Inspector
Home Inspector Midland
Home Buyers Guide
Inspecting Oil Tanks – TSSA

WETT Inspection Information

Innisfil WETT Inspections
Flue Pipe Installation
WETT Certified Inspection – Floor Protection
WETT Certified Inspection – Flue Pipes
WETT Inspection for Insurance

Inspections

Pre-Delivery Inspections
Pricing Policy
Privacy Policy
Types of Inspections
Roof Inspection
Home Inspection Certification

What Type of Inspection Do I Need?

 What is a home inspection?

Barrie Home Inspections Logo

A home inspection is a limited, non-invasive examination of the condition of a home, often in connection with the sale of that home.

A home inspector has the appropriate training and is ‘certified’ to perform home inspections.  His Home Inspection Knowledge and Experience are the key factors to consider when searching for a home inspector.  The inspectorCertified Barrie Home Inspector prepares and delivers to the client a computerized  report of findings. The client then uses the information presented to make an educated decision about their proposed real estate purchase. The home inspector describes the condition of the home at the time of inspection but does not guarantee future condition, efficiency, or life expectancy of systems or components.

A professional home inspector will look for signs of damage and defects. They’ll often refer buyers to a specialist to investigate further and fully diagnose the problem when and if they spot something significant, or something that Hire a Professional Home Inspector[/caption]lies outside their scope of expertise.

When purchasing a home one of the most critical steps any buyer must take is to get a certified home inspector to perform different types of inspections on the property. These visual examinations not only aid in assessing the condition of the house but its performance as well. Also, it helps you verify whether the owner carried out any maintenance or necessary repairs on the asset. Ironically, many first-time buyers presume that the inspection is simply a formality aimed at identifying the flaws within the house.

Hence, they don’t give the inspection the seriousness it deserves. In a haste to own the home, the buyers skim over the inspection, only to end up incurring endless expenses on property maintenance once they occupy their new residence.

So, just what types of house inspections should you conduct to ensure you get your money’s worth when closing on a home? The following are a few critical ones.

7  Types of Inspections You May Need

General  Home Inspection

The general inspection is perhaps the most common type of assessment known to homeowners. Here, the inspector will focus on features like the plumbing, HVAC system’s efficiency, electrical wiring, structural features as well as roof installations. If the property was being managed professionally there’s a good chance a lot will be intact but if it wasn’t the general inspection will help reveal issues.

The whole aim of the exercise is to identify defects or inconsistencies, which need improving, to bring the property to a desirable state. If the inspector spots an anomaly, he or she might recommend renovations or ask you to go for more specialized inspections.

When conducting a general home inspection, it is prudent to look for an inspector certified by a state-run agency, or one who is a member of reputable national organizations like the National Association of Home Inspectors, or the American Society of Home Inspectors.

Termite or Wood destroying insects

If you live in areas with warm climates then conducting a termite or wood boring insect inspection is a must. The review will help to unearth evidence of structural damage caused by termites, powder post beetles, carpenter ants, and bark beetles. Additionally, the investigation will bring to light any real structural defects likely to be problematic in the future. For example, wood being in direct contact with the soil, which can cause wood decay or dry-rot. While the cost of a termite inspection might vary depending on the property size and the inspector’s fee, it averages between $100 and $ 200.

Chimney Inspection

Crack-in-Cap on Chimney

Besides making the house look architecturally and aesthetically appealing, the chimney adds a sense of warmth, safety, and comfort to your home. It is, therefore, important that you inspect it to ensure it is working efficiently. The inspector will examine it to ascertain whether its joints, liners, flues, interior walls and connectors, have any defects such as cracks, which might inhibit the chimney’s effectiveness in discharging smoke. A chimney inspection costs approximately $ 75, and depending on the review findings; the inspector might recommend chimney restoration or maintenance services.

Foundation, Lot Size, and Boundaries Inspection

It is not surprising for a house to have a faulty and problematic foundation or lot size and boundary issues. Since such a property can cause legal and safety concerns, it is prudent to get an inspection report on these three elements. It will help to determine whether the house has any foundation issues, is sliding, sinking, or in the right location.

Radon Test and Harmful substances Inspections

No matter how attractive the property seems to be, you must obtain Radon Test and Harmful Substances inspection reports. You need to get these tested especially if the home is in New Jersey, Pennsylvania, New York, or areas renown for radon prevalence. Radon, a naturally occurring radioactive gas is carcinogenic. Besides testing for radon, the inspector should probe the property for any presence of methane gas, Asbestos, Formaldehyde, and mold, all of which can lead to serious health issues. In fact, when inspecting the property, bearing in mind how grave the matter is, you must make sure the inspector has the right certification to perform the assessment.

Water Inspections

If the home you are interested in gets its water supply from a well, you need to test the quality of the water, its water table depth, and sanitation level. Some of the things you should also check for include; water portability, hardness, and pathogens like E. coli, Volatile Organic Compounds, and heavy metals like arsenic, cadmium, and lead. Here too, you should only use a state-certified laboratory, preferably those listed on the EPA’s (Environmental Protection Agency) website.

Inspect the plumbing, septic, and sewer system

Even though you might have checked the plumbing during the general inspection you should find out from the plumber whether you need to replace the pipes, more so, if they are the galvanized type. These kinds tend to clog from time to time, meaning you might need to carry out frequenting plumbing maintenance. Similarly, get a sewer inspection to determine whether you home is connected to a sewer system or a septic tank.

Conclusion

When buying a house you should be adamant about getting your independent inspection reports, even if the property owner insists that he or she already has done the inspection. Even though it will cost you more, it might just save you a fortune in property repairs and maintenance costs in the long run.

Articles You May Enjoy

Home Inspectors Barrie Ontario
Midland Home Inspector
Home Inspector Midland
Home Buyers Guide
Orillia

WETT Inspection Information

Innisfil WETT Inspections
Flue Pipe Installation
WETT Certified Inspection – Floor Protection
WETT Certified Inspection – Flue Pipes

Inspections

Pre-Delivery Inspections
Pricing Policy
Privacy Policy
Types of Inspections
Roof Inspection

WETT Inspections and Chimney Inspections

What is WETT?

WETT certification is the qualification, by physical inspection and written report of all wood burning appliances and smoke stack system.  Manufacture requirements as set-out in the specific manual and the municipal building codes utilized to complete the assessment, report and certification. Since the mid 1970’s a large number of home fires have been attributed to the improper installation and use of wood burning appliances and masonry constructed fireplaces.  Insurance companies have increased the demand for W.E.T.T. inspections due to the high risk involved in wood burning for heating purposes.


Chimney Inspections Explained

Until recently, the scope of work performed in the inspection or evaluation of a fireplace, stove or other venting system was generally up to the discretion of the chimney service technician. Professional service technicians now have an industry standard that removes much of that “discretion.” The National Fire Protection Association (NFPA) has addressed the minimum chimney inspection standards in its latest publication (NFPA 211) concerning home heating appliances.

Inspections are now classified as Level 1 , Level 2 or Level 3 . Each level of inspection covers specific items depending on the individual appliance and venting system. Below is an explanation of the three levels of inspections and what services your chimney service technician should provide for each level.

Level 1 Inspections

If your appliance or your venting system has not changed and you plan to use your system as you have in the past, then a Level 1 inspection is a minimum requirement. A Level 1 inspection is recommended for a chimney under continued service, under the same conditions, and with the continued use of the same appliance. In a Level 1 inspection, your chimney service technician should examine the readily accessible** portions of the chimney exterior, interior and accessible* portions of the appliance and the chimney connection. Your technician will be looking for the basic soundness of the chimney structure and flue as well as the basic appliance installation and connections. The technician will also verify the chimney is free of obstruction and combustible deposits.

Level 2 Inspections

A Level 2 inspection is required when any changes are made to the system. Changes can include a change in the fuel type, changes to the shape of, or material in, the flue (i.e. relining), or the replacement or addition of an appliance of a dissimilar type, input rating or efficiency. Additionally, a Level 2 inspection is required upon the sale or transfer of a property or after an operation malfunction or external event that is likely to have caused damage to the chimney. Building fires, chimney fires, seismic events as well as weather events are all indicators that this level of inspection is warranted. A Level 2 inspection is a more in-depth inspection than a Level 1 inspection.– When a Level 1 or Level 2 inspection suggests a hidden hazard and the evaluation cannot be performed without special tools to access concealed areas of the chimney or flue, a Level 3 inspection is recommended. A Level 3 inspection addresses the proper construction and the condition of concealed portions of the chimney structure and the flue. Removal or destruction, as necessary, of permanently attached portions of the chimney or building structure will be required for the completion of a Level 3 inspection. A Level 2 inspection includes everything in a Level 1 inspection, plus the accessible portions of the chimney exterior and interior including attics, crawl spaces and basements. It will address proper clearances from combustibles in accessible locations.

There are no specialty tools (i.e. demolition equipment) required to open doors, panels or coverings in performing a Level 2 inspection. A Level 2 inspection shall also include a visual inspection by video scanning or other means in order to examine the internal surfaces and joints of all flue liners incorporated within the chimney. No removal or destruction of permanently attached portions of the chimney or building structure or finish shall be required by a Level 2 inspection.

Level 3 Inspections

A Level 3 inspection includes all the areas and items checked in a Level 1 and a Level 2 inspection, as well as the removal of certain components of the building or chimney where necessary. Removal of components (i.e., chimney crown, interior chimney wall) shall be required only when necessary to gain access to areas that are the subject of the inspection. When serious hazards are suspected, a Level 3 inspection may well be required to determine the condition of the chimney system.

Order you WETT Certified inspection today!  Only $75.00 when included as part of Home Inspection.

or Call Roger at 705-795-822  or Toll Free at 888-818-8608